PS Audio Sprout100
The all new Sprout100 is a power house integrated amp in a small form factor. This new Integrated Amp has everything you would expect for today's world with a high quality DAC, Phono input, analog inputs, 100 watts per channel power and if that is not enough a sub-woofer output for all of you bass hounds out there. PS Audio doubled the power in this new version of the Sprout so you have a lot more flexibility in speaker choice with this model from the previous model.
Here are the specs:
Physical
|
|
| Unit Weight |
2.9 lbs [1.3 kg] |
| Unit Dimensions |
Width 6.2", Height 1.9", Depth 8.2" (chassis only, not including knobs) or 9.2” (including connectors and knobs) |
| Shipping Weight |
5lbs [2.2 kg] |
| Shipping Dimensions |
Width 10.5", Height 5", Depth 14" |
Power requirements
|
|
| Voltage Options |
100-240 VAC, 50-60Hz, Auto-Detect |
| Power Consumption |
280W Maximum |
| Mains Power Input |
IEC C14 |
Phono Audio Input
|
|
| Connector |
1 Stereo Pair, Phono RCA |
| Cartridge type |
Moving Magnet |
| Cartridge Output |
3mV-10mV (5mV recommended) |
| Cartridge Loading |
47KΩ (100pF) |
| EQ Type |
RIAA |
| Gain |
+40dB |
| S/N ratio |
>84dB A-weighted (analog output) |
Analog Audio Inputs
|
|
| Connector |
1 Stereo Pair, Line Level RCA |
| Maximum Input level |
2.1VRMS (+6.44dBV) |
| Input impedance |
10KΩ |
Analog Audio Output
|
|
| Connector |
1 Stereo Pair, Line Level RCA |
| Output level, maximum |
3.0VRMS (+9.5dBV) |
| Output Max Gain (using Analog Inputs) |
8.45dB |
| S/N ratio |
>105dB (3VRMS ref) |
| THD (Analog) |
<0.01% (1VRMS, 1KHz) |
S/PDIF Digital Input
|
|
| Connector |
Optical (Toslink) |
| Format |
PCM (96KHz max), 24 bits |
USB Input
|
|
| Connector |
USB “B” Type |
| Format |
PCM (384KHz max), 24 bits, DSD64 (DoP), DSD128 (DoP) |
| Transfer mode |
Asynchronous |
Bluetooth
|
|
| Antenna |
Built in |
| DAC |
Uses Sprout's built in asynchronous DAC over S/PDIF (ESS Sabre 9016 DAC) |
Stereo Power Amplifier Output
|
|
| 8Ω loudspeakers connected |
50 watts per channel, both channels driven |
| 4Ω loudspeakers connected |
100 watts per channel, both channels driven |
| THD (Speaker Output) |
<0.01% (1W, 1KHz into 4Ω) |
| Frequency Response |
+/- 1dB (1VRMS out, 20Hz – 20Khz into 4-8Ω) |
| Signal to Noise |
>100dB at max power into 4Ω |
Headphone Output
|
|
| 32Ω headphones connected |
500mW |
| 300Ω headphones connected |
125mW |
| THD |
<0.01% (1KHz, 50mW into 32 Ω) |
| Signal to Noise |
>105dB at max power into 300Ω |
